GC-GO
Auto Gouging Carriage
- An Auto Gouging Carriage is equipment that removes metal using the heat generated from the arc of a gouging rod;
its primary purpose is to remove defective or old welds in order to repair or disassemble equipment. - An arc is generated on the metal surface, and compressed air is used to blow molten metal from the metal surface, creating a cut or groove.
The Auto Gouging Carriage is a rail-traveling gouging machine that adopts a rack gear and pinion gear drive system.
This equipment integrates the driving body and the control panel of the torch head, and performs work while traveling on a detachable rail.
| Specification | Autogaussing carriage | |||||
| Dimensions | 200(W)*320(L)*190(H) (±5%) | |||||
| Equipment weight (carriage + head) | 12 kg (±5%) | |||||
| Driving Part | driving motor | BLDC MOTOR (DC24V 20W 3000RPM) | ||||
| Reducer | 150 : 1 | |||||
| Equipment attachment/detachment method | Screw pressurization method | |||||
| Driving Method | Rail Travelling (Rack Gear Type) | |||||
| Traveling Speed | 0~ 1200 mm/min | |||||
| Gouging torch head | Feeding | 0~ 1200 mm/min | ||||
| Feeding drive motor | Stepping MOTOR | |||||
| Reducer | 15 : 1 | |||||
| Gouging torch adjustment range | Up/down ±40mm, front/back ±40mm | |||||
| ± 45˚ | ||||||
| Vacuum rail (optional) | Size/Weight | 70(W)*1500(L)*80(H) / 6 Kg | ||||
| Vacuum pad | Φ150 *27mm red silicone (over 400℃ / 1.5M, 2EA) | |||||
| Vacuum pump | 220V 1/4HP 50/60Hz | |||||
| Magnet rail (optional) | Size/Weight | 70(W)*1500(L)*80(H) / 6 Kg | ||||
| Magnet | Mag switch (1.5M , 2EA) | |||||
Weaving mode
Welding Position
